Forum Messages

Forum Home Page

Date Name Message
09/04/2006 01:39:46   Stephen J Melling   I just recently purchased a 1973 Sonnett III. It seems to be missing on one of the cylinders. I am having trouble removing and replacing the front plugs. Is there any hints or techniques or special tools I should know about?

SJM  
09/04/2006 16:39:13   chrisP   Hi
The best tool i have found for no.1 cylinder the plug behind the autenattor is the one in the tool kit that came with the car when new. but I have used a cranked ring spanner be careful the spare terminal on the back of the autenattor is covered or disconet the battery or you will short things out.  


Post Reply

Name
E-Mail
Reply