Forum Messages

Forum Home Page

Date Name Message
14/10/2003 12:57:21   Jim   I've just got hold of some AVO shocks, but what to fit some lowering springs at the same time. Does anyone know where I could get hold of some?  
14/10/2003 15:50:13   bill rawles   Unless you particularly want a firmer ride then buy or borrow an angle grinder and shorten the standard springs. You only need to lower the car a fraction, I have done mine by about 1/2 to 3/4 of an inch by cutting 180 degrees off the end of each coil. It doesn't sound much but makes a real difference. I have Avo's as well and the combination seems to work well.  

Post Reply