Forum Messages

Forum Home Page

Date Name Message
08/06/2005 13:48:17   Olga   Hi is it poss to replace front seats of a 1976L for modern ones from a scrappy
Thanks
Cassie  
08/06/2005 17:43:04   ian   yep done it twice...900 seats do fit with a bit of work  
09/06/2005 08:06:32   Richard   Sat in Ian's lads car and they are very nice.  
09/06/2005 10:17:22   Alistair   I've also had 99/900 seats in a V4. Just have to drill holes in the runners to screw them into the original mounts on the floor of the V4. Make sure you use new high tensile screws for this...and be careful about the positioning of the seat so you have enough fore & aft adjustment.

IIRC I had mine so that there was max overhang at the rear, and I don;t have particularly long legs...  
09/06/2005 22:07:54   ian   GO ALONG WITH THAT...THEY DO HAVE TO HANG OUT OVER THE REAR A BIT...BUT ACCESS TO THE REAR IS OK  


Post Reply

Name
E-Mail
Reply