Forum Messages

Forum Home Page

Date Name Message
19/08/2005 08:01:23   Richard   If you are using a twin choke weber it is worth pulling the fuel pipe inlet out and pining or gluing it in place (make sure fuel does not desolve it). They are well known to come out of the carb body and spray fuel over the engine bay!  
19/08/2005 08:01:23   Richard   If you are using a twin choke weber it is worth pulling the fuel pipe inlet out and pining or gluing it in place (make sure fuel does not desolve it). They are well known to come out of the carb body and spray fuel over the engine bay!  
19/08/2005 14:26:38   simon   I have found this with the single choke units also.  


Post Reply

Name
E-Mail
Reply