Forum Messages

Forum Home Page

Date Name Message
20/12/2005 12:25:50   julian uzzell   Before I get the tin snips out, can anybody please tell me if repair panels are available for the 96? The usual areas, inner wings etc. Would appreciate any help. Thanks.  
20/12/2005 12:32:45   Richard   Unless you can find old stock (try sweden) you will have to repaire te inner wings.  
20/12/2005 19:43:30   julian uzzell   Richard, thanks for that one. Found parts in sweden and USA.
Have you restored one of these? If so, do you have any tips?  
21/12/2005 00:12:03   Senor Burt   Where?  
21/12/2005 07:34:37   Richard   I just started at the worst end of the car and worked my way to the other end. The cills can be a bit of a pain to get off and you need to be carefull not to distort the area above the rear wing if that needs welding.  
22/12/2005 17:44:26   Gary W   Ive got lower doorskin repair panels plus proper jacking points if you need them
Ive restored the bodywork of over 30 95/96s if you need any help/advice email me!  


Post Reply

Name
E-Mail
Reply