Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!
|T O P I C R E V I E W|
|greg124||Posted - 05 Jan 2018 : 21:18:22|
Having just stripped down one of the front hub assemblies, I've found that the brake disc backplate was held on with two self tappers and two pop-rivets.
I am thinking that this is unlikely to be correct/original. Does anyone know what should be used?
|2 L A T E S T R E P L I E S (Newest First)|
|greg124||Posted - 06 Jan 2018 : 21:05:42|
That's something else to add to the list next time I visit Metalwork Supplies
|Woody||Posted - 06 Jan 2018 : 20:39:38|
Parts book shows 4 x Hex-head screws for each side. 1/4 UNC thread.
My first V4, 1969 deluxe had the hex-head screws but my second V4 1972 model had dome-head pozi-screws. The pozi screws seized and were troublesome to get out.