SAAB V4 Forum
SAAB V4 Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
 All Forums
 '77 95 V4 van conversion

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Format Mode:
Format:BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List

* Forum Code is ON
Smile [:)]Big Smile [:D]Cool [8D]Blush [:I]
Tongue [:P]Evil [):]Wink [;)]Clown [:o)]
Black Eye [B)]Eight Ball [8]Frown [:(]Shy [8)]
Shocked [:0]Angry [:(!]Dead [xx(]Sleepy [|)]
Kisses [:X]Approve [^]Disapprove [V]Question [?]

Check here to subscribe to this topic.

T O P I C    R E V I E W
mellePosted - 10 Mar 2012 : 23:25:27
As requested by some of you, here we go with a project thread on my 95 V4 van conversion. Yes indeed, I'm a bit van-mad: You might have seen some of the pics before elsewhere on the forum.

I got this '77 95 V4 for free couple years ago. The car was partially dismantled and the owner had to get rid of it because he couldn't afford the space any more he'd rented for its restoration. I had the car transported from the South of the Netherlands to my workshop in the North with the intention of breaking it.

Interior and bumpers weren't included:

It came with some spares as a bonus though:

The car was on very good tyres on powder coated rims, so these went straight onto another 95 I had back then. On further inspection I found it was fitted with a VeGe engine (1500 HC) and a reconditioned gearbox. These went in my 96. I had the car on the lift the day before I planned to break it and found it to be pretty solid over all. This made me decide not to break it, but convert it into a panel van instead. I've always wanted to have one of those, but as they're pretty rare and I'm a poor fella the real deal has never been an option for me.

I decided to stay true to the style of the original vans (1969/ '70) and fit it with chrome bumpers. But since for the rest of it it's not original anyway, I thought I'd make it exactly as I want it: with a heightened roof and MK I/ II Ford Escort van rear doors.

Conversion sketches:

Mock fit heightened roof:

For practical reasons (mostly lack of time) I finally decided against heightening the roof, so I'm only closing off 3 out of 4 side windows and converting the interior.

Most of the structural welding (mostly floor) is done and the inside is starting to take shape:

I have an overhauled V4 for it and a gearbox with only 17k kilometres. Couple weeks ago I found a set original van-seats in Finland (hope to find a way to get them southward). Progress on this project has always been slow and will also be slow in the future, since I used to live in Amsterdam, Aberdeen and now in Aarhus, Denmark and my workshop in in Groningen (NL).

More to follow!

1970 96V4 "The Devil's Own V4"
1977 95V4 van conversion project
1988 900i 8V
15   L A T E S T    R E P L I E S    (Newest First)
DirtbikerPosted - 25 Mar 2020 : 16:32:10
Won't go into too much depth here as you aren't doing a re-trim but this thread may be of use,Tex
The perforated and fluted on Derek's Woolies link was the closest I could find to MB Tex but only in black.
I went round in circles on this and ended up ordering something that isn't what I would use if I did it again but I am still really happy with!
Your best bet as you say would be to find a set of US covers. Funnily enough my new project came with a spare set of front seats but disappointingly they are not vinyl.
mellePosted - 25 Mar 2020 : 12:17:02
I can't justify spending on having seats re-upholstered before I have the car back on the road, I may certainly consider it when I get there.
DerekPosted - 25 Mar 2020 : 12:02:05
This is readily available from Woolies and many others.

Other colours too if you look around.
mellePosted - 24 Mar 2020 : 22:35:57
Yes, it's a pic from the web as an example of what I'm looking for! There is a variety of MB Tex (= Mercedes-Benz vinyl) that is a pretty good match.

I've had a few leads on seats/ covers in the States and in Finland in the past, but unfortunately they've all proven to be dead ends... No rush fortunately, I have plenty of standard seats I can use should I have the car ready for the road before I find a nice vinyl set.
DirtbikerPosted - 24 Mar 2020 : 22:19:46
Hi Melle,

Hadn't seen this update. I have never actually seen a set of vinyl covers in the flesh. That was I wanted to recreate when I had the 96 interior done but couldn't find any material that looked the same and the task was made more difficult by not actually knowing what I was looking for... Can those covers be improved?


Edit: they aren't actually your seats are they, just a picture from the web?
mellePosted - 21 Mar 2020 : 15:16:59
Apart from a little underseal scraping, I've not done any real work on this car since 2015. High time to get stuck back in, so I crossed off three weeks in April in my diary, bought a plane ticket and invested in a load of parts, all with the intention of giving this project a push in the right direction. Looks like it's not going to happen any time soon though...

I think I've got most of the parts I'll need to complete this, but I'm still on the lookout for a set of decent condition vinyl seats (just the upholstery will do, preferably brown or black but colour not too important).

I'll also need a 900 fuel pump relay if anyone has a spare:
greg124Posted - 16 Apr 2018 : 00:29:22
I did this in the 'outside workshop' so didn't notice any fumes, and hopefully any nasties were carried away on the breeze
mellePosted - 15 Apr 2018 : 22:25:30
That's how I did a part of the engine bay, but it stinks as hell and I can't imagine the fumes (probably including PAHs, PCBs and other nasty stuff) being healthy either.
greg124Posted - 15 Apr 2018 : 22:14:27
I found the easiest way to strip original underseal is apply gentle heat with a hot air gun, then get the corner of a blade under the edge and it will peel off in sometimes surprisingly large strips. This just leaves a few remnants to wipe off with white spirit. This doesn't damage the original zinc primer - where is is sound that is
mellePosted - 15 Apr 2018 : 21:24:03
Originally posted by Dirtbiker
That bulkhead looked lovely in bare metal!
It did! In the pic with primer on it you can clearly make out where the metal's been overheated. I welded the centre section in very carefully, making sure not to bring too much heat into the metal, but messed it up when grinding off the welds in a hurry with a flap disk on the angle grinder. I find a power file gives much better results if you're a little heavy handed by nature. Not that it matters much here, it will be invisible with the heater box back in place.

I recommend you get a cheap oscillating tool (Aldi/ Lidl?) for removing underseal, it took me about an hour to clean the one I used as everything was covered in black sticky muck. I may buy a cheapy for the rest. When done scraping, I'll quickly wire wheel what's left of the underseal and then wipe the remains off with naphta (can't find it in the UK, sold in NL as "wasbenzine", I think Coleman/ stove fuel is similar). White spirit, kerosene, diesel etc. all leave a residue, not ideal on a surface that needs paint later.
DirtbikerPosted - 15 Apr 2018 : 20:03:41
That bulkhead looked lovely in bare metal!
I have found with the SAAB under seal that soaking it in white spirit helps it soften up nicely but I'm guessing this one has been coated with something else. I have also heard diesel works well. Like you say, all messy though!
I haven't tried one of those oscillating tools - I'll add it onto the Christmas list!
mellePosted - 10 Apr 2018 : 13:08:43
Long overdue update! I see I never updated this thread with the work I did when I last worked on this car in March 2015, before the 96 and other projects claimed my sparse workshop time.

Bulkhead and windscreen channel fixed (the blue/ black stuff is Fertan rust converter):

Repairs in primer and factory seam seal replicated:

Starting to look like a car again, before being taken apart again for further rust repairs:

Before I weld the airbox back in place, I want to hang the doors to make sure everything aligns. Before I hang the doors though, I want to fix the door bottoms and the floor. To do the latter, I will tip the body on its side, which is an easier job without the weight of the doors.

I promised myself a full week to work on the car around Easter this year, but of course other commitments claimed a few days to begin with... I planned to do some welding, but after taking the cover off the car I realised I had to face reality and start scraping underseal before committing to any sheet metal work...

Started by removing the rear axle and lifting the car a few feet to create a slightly more comfortable working position:

I've tried several methods to remove underseal in the past (torch, wire wheel, petrol, paint stripper etc.); they were either not very effective or very, very messy. I recently saw someone on RetroRides use an oscillating multitool with a scraper and as luck would have it, my father in law has one. Like the powerfile and Dremel in the past, I always thought it was a bit of a novelty rather than a serious tool. However, I have to admit that, like the two aforementioned tools, it certainly has its use! I found it works best if you keep a keen edge on the scraper blade all the time; I used a flapper disk on the angle grinder to quickly sharpen it every few minutes.

Still took me a day and a half to remove the underseal from one rear arch and the donor rear floor, unfortunately the previous owner used good quality stuff:

I've tried a small section and what underseal remains, will come off quite easily with a wire wheel on the angle grinder. I'm afraid next time I'll have to do the other rear wheel arch, but then the fun can begin! No amount of rust scares me these days, but I think I'll pass on the next car with this amount of underseal...

The current rear floor has quite severe rust damage and has been patched in numerous places in the past. I will use good sections of the current floor to repair the donor floor and then weld that in place. Many other small rust repairs needed in and around the rear wheel arches, but nothing insurmountable. I have a complete rear tub in reasonable condition, but most parts are easy to fabricate from sheet anyway.

PS: not sure what happened to some of the pics in the opening post, will try and fix that at some point.
mellePosted - 03 Apr 2017 : 23:17:34
Yes, I still have it and it's going nowhere fast. I was going to continue on it last summer, but the 96 needed a fair bit of work quite unexpectedly ( My workshop time is very limited and I am, amongst other projects, also restoring a lathe and building a K-Jet V4, an engine test bench and an air compressor. All those projects I can work on in between work stuff and visiting friends and family when I'm in NL; for bodywork I really need a week or two in a stretch to gain momentum. I'm in no hurry though, I don't have time to drive it anyway! I might redo the off-side inner front wing by the way, never been 100% happy with it and I was given a reasonable condition engine bay/ front section last year by a chap who's building a 95 trailer.
ZagatoPosted - 03 Apr 2017 : 21:02:44
What happened to the project Melle, have you still got her? Incredible chopping/welding work you have put into her.

mellePosted - 22 Sep 2014 : 20:20:00
It's in my workshop in the Netherlands and it won't come to Ireland in the foreseeable future I'm afraid. Gives me good reason to pop over to NL every now and then (don't tell my family and friends ).

1970 96V4 "The Devil's Own V4"
1977 95V4 van conversion project
1988 900i 8V

Snitz Forums 2000
SAAB V4 Forum© 2000-04 Snitz CommunicationsGo To Top Of Page