T O P I C R E V I E W |
IrishV4 | Posted - 07 Oct 2017 : 23:56:42 Hi, Anyone got an ignition switch with key? Also need the 2 gaskets for manifolds to exhaust. Thanks, Jim. |
14 L A T E S T R E P L I E S (Newest First) |
RhysN | Posted - 27 Oct 2017 : 08:09:02 I tried sending emails from the site and failed. Melle told me that it's somewhat erratic so best not to try and to find another way. |
IrishV4 | Posted - 26 Oct 2017 : 23:19:11 Many thanks to 72sonett3 who has sorted me for gaskets.
And thanks for your help Melle.
Jim. |
72sonett3 | Posted - 20 Oct 2017 : 10:54:18 quote: Originally posted by IrishV4
I don't appear to have received the e-mail.
I sent it by clicking the "Email Poster" button. Apparently that does not work, or maybe there's an old email address under that button.
Anyway... I've sent you an email asking for an address to send the gaskets to. Meanwhile I received your response, the gaskets will go in the mail tomorrow.
(BTW we also have copper head gaskets.)
-- '72 97 '77 96L conv. '79 96GL (LPG) '83 900i (LPG) '95 900SE conv. '99 9-3T |
IrishV4 | Posted - 19 Oct 2017 : 21:53:46 Hi 72sonett3,
I don't appear to have received the e-mail.
My e-mail address is jimmccormack1 at hotmail.com
Thanks,
Jim. |
72sonett3 | Posted - 17 Oct 2017 : 17:09:20 quote: Originally posted by IrishV4
... How much do you want for them incl postage to Ireland?
Jim, check your e-mail...
-- '72 97 '77 96L conv. '79 96GL (LPG) '83 900i (LPG) '95 900SE conv. '99 9-3T |
melle | Posted - 14 Oct 2017 : 15:44:45 Jim, the copper exhaust gaskets work a treat, but you need to make sure the manifolds and flanges are clean and dead flat and the copper is deburred, or they'll leak.
www.saabv4.com |
IrishV4 | Posted - 14 Oct 2017 : 00:28:20 Hi 72sonett3, Thanks, that would be great. How much do you want for them incl postage to Ireland? I can pay by paypal gift. Jim. |
melle | Posted - 12 Oct 2017 : 18:59:03 Yes, I have a few as well but they're in NL and I won't be there before December; I guess Jim needs them sooner.
www.saabv4.com |
72sonett3 | Posted - 12 Oct 2017 : 16:28:35 I have two copper ones for you if you want them... (Melle may have those too.)
-- '72 97 '77 96L conv. '79 96GL (LPG) '83 900i (LPG) '95 900SE conv. '99 9-3T |
IrishV4 | Posted - 12 Oct 2017 : 01:39:39 Melle, thanks very much for your help. Jim. |
melle | Posted - 11 Oct 2017 : 14:03:57 I can't find the Bosal number, but the stud spacing is 67mm and the port diameter is 40mm. The motor factors I use have a Bosal wall chart where they can find the right ones with this information. They are about €2 apiece and identical to the V6 exhaust gaskets, so Burtons etc. will probably also stock them if you can't get any locally. I bet you know a local specialist though who can sort you a pair through his trade channels. ;)
www.saabv4.com |
melle | Posted - 11 Oct 2017 : 10:02:30 I should have a Bosal part number somewhere, I'll look it up later.
www.saabv4.com |
IrishV4 | Posted - 10 Oct 2017 : 23:41:36 Thanks for the reply Melle. Just to be perfectly clear I'm looking for the gasket between the exhaust and the manifold not the one between the manifold and the head. Jim. |
melle | Posted - 08 Oct 2017 : 19:27:05 Jim, you can get exhaust manifold gaskets from any motor factors, they're a standard size.
www.saabv4.com |