|T O P I C R E V I E W|
|greg124||Posted - 01 Mar 2018 : 13:44:27|
I've lost one of the needle rollers that go in the caps on either end of the 'T' at the inner end of the driveshafts.
Would anyone be able to supply me with a small quantity, please?
|7 L A T E S T R E P L I E S (Newest First)|
|green96v4||Posted - 02 Mar 2018 : 18:54:11|
damn I spend ten times that for a set from a Saab garage
Did come with the cups too though.... (not that I need spare cups)
|greg124||Posted - 02 Mar 2018 : 12:26:25|
Thanks for that link Alec.
They come in packs of 10, so I've ordered one pack for £5.58 inc VAT and postage.
It is now almost inevitable that the missing one will emerge from the muck on the engine bay floor before they arrive
|melle||Posted - 02 Mar 2018 : 12:24:33|
Yes, those should work just fine.
|v4admin||Posted - 02 Mar 2018 : 11:53:33|
I think these should be ok...
|melle||Posted - 01 Mar 2018 : 21:55:14|
|greg124||Posted - 01 Mar 2018 : 20:01:22|
I'd like to get it all reassembled once the weather has cleared up - but who knows when that will be. If you do happen to find the size in the meantime I'd appreciate it
|melle||Posted - 01 Mar 2018 : 19:43:17|
I'm happy to send you some when I'm in the workshop by the end of the month, but I'm sure someone else will come to the rescue if you need them urgently. You can get them new from bearing suppliers/ eBay if you get stuck, they're a standard metric size (that I wrote down somewhere but cannot find now).