All Forums  Technical  General Technical  fitting highgate exhaust to a 96

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:	640 x 480800 x 6001024 x 7681280 x 1024
UserName:
Password:
Format Mode:	Basic Help Prompt
Format:
	FontAndale MonoArialArial BlackBook AntiquaCentury GothicComic Sans MSCourier NewGeorgiaImpactLucida ConsoleScript MT BoldStencilTahomaTimes New RomanTrebuchet MSVerdana Size123456 ColorBlackRedYellowPinkGreenOrangePurpleBlueBeigeBrownTealNavyMaroonLimeGreen
Message: * HTML is OFF * Forum Code is ON Smilies	[quote][i]Originally posted by bigpentti[/i][br]Hi everyone,i am in the middle of fitting a highgate twin exhaust system i got of john-saab last year,everything was going well until i tried to but the exhaust manifold nuts on, there is not enough room between the new wide exhaust and the studs,then i remembered woody telling me i had to fit alen headed bolts to get the clearance, as those studs have been in there for 30+ years i did not want to start taking them out so i have had a brainwave. i have welded 5 nuts together x4 then ground down the first 4 to the diametere of a cup head bolt and they fit great. before i finish off the exhaust can anyone see a problem with this new nut system. i was going to finish it today saturday but the bloody snow is back again. thanks in advance of your wisdom cheers, john [/quote]
	Check here to include your profile signature. Check here to subscribe to this topic.

T O P I C    R E V I E W
bigpentti	Posted - 19 Feb 2011 : 08:37:22 Hi everyone,i am in the middle of fitting a highgate twin exhaust system i got of john-saab last year,everything was going well until i tried to but the exhaust manifold nuts on, there is not enough room between the new wide exhaust and the studs,then i remembered woody telling me i had to fit alen headed bolts to get the clearance, as those studs have been in there for 30+ years i did not want to start taking them out so i have had a brainwave. i have welded 5 nuts together x4 then ground down the first 4 to the diametere of a cup head bolt and they fit great. before i finish off the exhaust can anyone see a problem with this new nut system. i was going to finish it today saturday but the bloody snow is back again. thanks in advance of your wisdom cheers, john
5   L A T E S T    R E P L I E S    (Newest First)
pchristy	Posted - 19 Feb 2011 : 21:10:09 Come to think of it, my car hasn't got studs for the exhaust mounting. Its fitted with bolts! There is one large head and one small head on each side! When I took the Highgate off and fitted a Jetex, I simply re-used the bolts! It never occurred to me that they were non-standard! -- Pete "Duct tape is like the Force: It has a light side and a dark side, and it binds the Universe together!"
john-saab	Posted - 19 Feb 2011 : 20:16:23 I'm no help..i never got around to fitting it. Don't forget to post a few pictures once it's fitted!
pchristy	Posted - 19 Feb 2011 : 18:18:59 Are your neighbours talking to you again yet, Chris? -- Pete "Duct tape is like the Force: It has a light side and a dark side, and it binds the Universe together!"
transit80	Posted - 19 Feb 2011 : 18:07:55 And dont park between houses and rev it up!!!!, Ive heard it. Chris
pchristy	Posted - 19 Feb 2011 : 14:29:49 That's my old exhaust! Make sure you have ear-defenders on when you fire it up.....!!! :D -- Pete "Duct tape is like the Force: It has a light side and a dark side, and it binds the Universe together!"