melle
V4 Guru
United Kingdom
3440 Posts |  Posted - 21 Dec 2014 : 23:28:10  
| I keep this thread up to date; last updated 2 January 2022. Some of these parts may also be on eBay, but you'll always get a better deal when contacting me directly by email at saabv4[at]saabv4[dot]com
All below parts are used and come strictly without warranty, prices are non-negotiable and plus post or collected from Bath. Inspection prior to purchase welcome. If you're interested in any of below parts, please email me at saabv4[at]saabv4[dot]com Any questions please feel free to ask and if you need more pics please let me know.
Happy to accept a 16" wood rim Moto Lita steering wheel and boss (http://www.saab-v4.co.uk/speedball/topic.asp?topic_id=43854) as payment plus/ minus cash if relevant.
– 1.7 crankshaft, £150 – £350 depending on condition (several available, will be shipped in wooden box if required)
– 1.5 crank, good condition, £100 (will be shipped in wooden box if required)
– 2bbl/ Weber/ Solex inlet manifold (without vacuum intermediate plate, of which I currently have none in stock), £175 (example pic, several available)
– Timing gear set, £75 (example pic, several available). Separate cam gear £15, separate crank gear £15
– Timing cover, £25 (example pic, several available)
– Rare timing cover without fan bearing, Ford part number 11 425 625, £250
– 1.5 HC pistons (standard Ø, measured with vernier calipers, not micrometers), set of four from one engine, reasonable condition, con rods useless as caps are missing, £20
– 1.5 HC pistons set of four from one engine, pic to follow, £100
– Balance shaft, journals scratch free and within spec, £75 (pic is just an example, pics of actual shaft can be sent, several available)
– Camshaft, journals scratch free and within spec, good usable lobes, £75. Cam shaft for regrind (journals and lobes will need grinding), £20 (pic is just an example, pics of actual cam can be sent, one usable one and several for regrind available)
– Oil pump, £10, proceeds to Red Cross (pic is just an example, several available)
– Free parts: thermostats, temp sensors, balance shaft plugs, valve springs, push rods, tappets, head bolts. All parts in below pic (as far as still available) + more completely free of charge including shipping, but a small donation to the Red Cross to offset the shipping costs would be appreciated. Complete push rod and tappet sets from one engine available as well and I have multiples of all parts in NL should stocks dry up. If you need any other small parts and nuts and bolts, just ask. Fair use policy. ;)
1970 96V4 "The Devil's Own V4"
1977 95V4 van conversion project
1988 900i 8V |
Edited by - melle on 02 Jan 2022 22:02:10 |
|
Topic 
Weber inlet manifolds/ (1.7) engine parts
